The MaxxAir MaxxShade Roller Shade # MA00-03900 that you referenced hangs down 2 inches from the ceiling it's installed on. As long as there's 2 inches from the top of your slide out and the ceiling it would fit under this.
I attached a review video for this for you to check out as well with more info. view full answer...
Hey James,
Can you send me some pictures of the molding so I can get a better idea of what could be preventing you from pulling up the vinyl? view full answer...
A base plate kit is the hardware that gets bolted to the front of a vehicle which is what provides the attachment point for a tow bar when flat towing. I attached a link to this page that is a help article that covers what base plate kits are as well for you to check out.
The difference between the # RM-4700 and the # RM-4750 is being able to use them with your base plates. If you have the crossbar on your base plates you will need part # RM-4700.
The RM-4750 is not compatible with... view full answer...
Thank you for the purchase! Since your steps are operating backwards, the issue is likely the reverse polarity of the motor. What you should do is try reversing the red and yellow wires to reverse the functions so the steps aren't out.
Additionally, the Kwikee 32 Series Electric RV Steps # LC3722615 does not actually come with the switch kit, however; for that you need the Rocker Switch with Door Sensor for Kwikee Electric RV Steps - 250V # LC369311. view full answer...